APC Tools & Equipment Q2 -2019

ENGINE SERVICE

TIMING SERVICE TOOLS

SERPENTINE BELT SERVICE TOOLS

ATD-8614

Variable Pin Spanner Wrench • Use with 1/2" drive ratchet or breaker bar • Accommodates the most common metric size pin configurations including: 3.5mm, 4mm, 4.5mm, 5mm, 6mm, 7mm and 10mm

GW-3680D

15 Pc Serpentine Belt Tool Kit • 100% coverage of all vehicles

$95. 49

$109. 95 GW-89000

LIS-13800

Water Pump Sprocket Holder for GM Ecotec • Holds the Timing Chain and Gear in Place While Removing or Installing Water Pump on Ecotec Engines. • Securely holds water pump sprocket preventing loss of timing or damage to the engine. Special half-moon design allows easier access to water pump gear bolts. Uses access cover bolts to hold the tool in place.

Serpentine Belt Tool Set w/Locking Flex Head Ratching Wrench • New and improved 15 Pc Serpentine Belt Tool • New locking flex-head ratcheting wrench has 5-locking positions • Each locking position is 17Deg • New wrench designed to get around obstructions, lines, motor mounts, pulleys, etc.

$44. 95 LIS-36880

$119. 95

Dual Overhead Cam Lock Tool • Dual overhead cam lock tool locks camshaft sprockets in place during belt / chain replacement • This versatile tool easily locks and holds both camshaft sprockets firmly in place • The two parallel bars “float” which allows the knurled pins to align with the sprockets • Preserves the engine timing during belt or chain replace

LIS-59000

Ratcheting Serpentine Belt Tool • Includes 13, 14, 15, 16, 18mm, and also 19mm socket for Honda and Toyota applications, extension, 3/8" & 1/2" square drives

$47. 95

LIS-18000

$99. 95

Universal Camshaft Bearing Tool • Drives camshaft bearings smoothly • 1.125" - 2.69" (28.58 - 68.3mm)

$269. 95

LIS-59370

Stretch Belt Remover/Installer • Magnetic faces hold the tool in place on the pulley • Compact, one-piece tool can be used on the front or back side of the pulley

LIS-37100

Timing Tool for Ford 3.5L & 3.7L • For use when servicing the timing chain on Ford V6 3.5L (2007+) and 3.7L (2009+) engines • Helps ensure camshaft alignment during removal and installation of the timing chain

$27. 13

WATER PUMP TOOLS

$69. 95

OTC-6677

SLY-13500

Time Chain Retainer • The tools retain the timing chain and lower sprocket positions while servicing the upper sprockets, camshafts, valve springs, or valve seals on 2011 and later 2.0L and 2.4L Ecotec engines • Also used for cylinder head replacement

TOYOTA Water Pump Pulley Wrench • Removes water pump pulley bolts on the 2.4L 2AZ engine used in the TOYOTA Camry and many other models built from 2002 to 2011

$99. 95

$122. 95

LIS-13500

CTA-4333

Camshaft Pulley Holding Tool • Grooved pins hold the camshaft pulley stationary while loosening and tightening the center shaft bolt • Especially useful for transverse mounted V6 engines, • Adjustable distance: 21mm-100mm

41mm Water Pump Wrench for GM 1.6L • Works on 1.6L engines in 2004-current Chevrolet Aveo, Pontiac Wave, Suzuki Swift, excluding 2009 with variable timing engine and 1999-2002 Daewoo Lanos

$124. 95

$26. 95

179 179

April 1 to June 30, 2019

prices are subject to change and will be confirmed at time of order. please see www.g2sonline.ca/catalog for updates and corrections.