APC Tools & Equipment Q2 -2019

FRONT-END & SUSPENSION

AXLE & SPINDLE TOOLS

OTC-4543A

6 Pc 4WD Spindle Nut Socket Set • 6 PC socket set covers most SUV and ligh truck applications • 1/2" square drive sockets, allowing use of a torque wrench, ratchet, or breaker bar • Fits full-size GM, Ford, Jeep, and Intl p/u with Dana front axles

$143. 95 AST-78410

MUK-433 100

Adjustable Blind Inner Bearing Slide Hammer Puller • For bearings and bushings with 0.75 – 2.3" inside diameter or up to 2.0" when pulling from outside diameter • Jaws remain in a straight extended orientation when adjusted • 2.5 lb. sliding hammer, 5.9 lbs. total weight

Master Suspension Kit • The kit includes an XL slide hammer that provides up to 11 tons of force • A drop forged flange ensures maximum rigidity when pushing out the drive shaft • The drop forged hook in combination with the XL slide hammer ensures that a lower ball joint can be removed with one blow, according to the company • The kit includes an adapter so users can use their existing tools with the XL slide hammer • All components are neatly stored in a neon green carrying case

$99. 95

LOC-LT855A

Texas Twister Air Hammer Pulling Kit • Convert your air hammer into a pneumatic slide hammer • Pull axles, seals, pulleys, wheels, distributors, speed sensors • Hammer bolts, studs, engine and trans mounts from the back side with the J hammer • Extend reach of tool with 20" extender

$1,374. 95

AST-78868

$369. 95

8 Pc. 12-Pt Axle Nut Socket Set • Designed for an exact fit on both 6pt and 12pt axle nuts • 1/2" drive extra deep • Includes large 39mm socket for Toyota/ Lexus applications • Includes: 29mm,30mm, 32mm, 34mm, 35mm, 36mm, 38mm, 39mm

STK-71410

Axle Popper • Pops axle shaft loose from engine • Insert fork between transaxle case and half shaft. Strike the end of the fork to release the shaft. • Included shim fills larger gap found on some vehicles • Safer and surer than a pry bar

$99. 95

$76. 60

WHEEL HUB PULLERS

MUK-433 414

ATD-8629

Universal Axle Shaft Pusher/Hub Puller • For use with an impact wrench (not included) : the vibration impact of the pneumatic wrench is transmitted to the wheel hub and to the axle shaft through the spindle • Suitable for almost all 4- and 5-hole wheel hubs with a pitch circle diameter of up to 136mm • Pushes out bonded or heavily corroded axle shafts • Can also be used in conjuction with the #433 450 slide hammer and #433 450/14 adapter with UN 1-1/2" thread, or any other slide hammer with the appropriate thread, for extracting wheel hubs

Wheel Hub Removal Tool • Safely removes frozen hub assemblies instantly • Will not damage axles

• Universal mount fits all axle bolted hubs (5,6 and 8 lug hubs) • Use with 5lbs hammer to knock frozen hubs out of axles • 3/4” steel backing plate and reinforced striking plate for long life

$169. 95

$326. 95

OTC-6575

Hub Grappler™ • Six new adapters increases application coverage up to 2009 model year • Also includes tie rod/ball joint tool and 2 Ford axle installers

CAL-957

KKU-229 2

Adjustable Puller • 2” to 5” Diameter • 2 Depth • 3 jaw adjustable puller • Jaws stay put before tension is applied for ease of use • Low profile to reach into tight places • A versatile puller for all your pulling needs

$823. 95

Hydraulic Hub Puller • For pulling all 4 and 5 hole hubs on almost all passenger car models • Also used for extracting drive shafts for vehicles with front wheel drive • 10-ton hydraulic spindle

OTC-4579

9-Way Slide Hammer Puller Set • 5 lbs hammer

•Pulls flange-type rear axles and most ? front-wheel drive hubs •Set also includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements

$99. 95

$479. 95

$152. 95

191

April 1 to June 30, 2019

prices are subject to change and will be confirmed at time of order. please see www.g2sonline.ca/catalog for updates and corrections.