APC Tools & Equipment-Q2-2021

PULLERS

Slide Hammer Pullers

Gear, Bearing & Pulley Pullers / Splitters

KKU-204-V $210 95

2-Jaw Puller with Side Clamp for Inner Races • Thin, hardened puller hooks • Strong integrated slide clamp for increased force and prevents hooks from slipping • Adapter fits on all common axial holes • No cutting, grinding, chiseling or hammering required

AST-78415 $81 95

Locking Pliers Slide Hammer • Universal puller • 2.5 lbs slide hammer

MUK-650 200 $336 45

14-Pc Slide Hammer and Puller Set • 2 lb. slide hammer CAL-49700 $103 95

Universal Race Puller • Universal three-legged bearing ring puller provides equal gripping power on each side, avoiding any tilt • Adjustable clamping chain offers ideal grip and power • Fits all kinds of bearings and sleeves between 40mm and 60 mm

• Can be used to pull seals, bearings, pressed studs, or even for straightening body panels • Capable of inside spreads from 3/8" to 1-1/4" and outer spreads up to 3" • Puller reaches depths up to 2-1/2"

OTC-7494A $83 45

Rear Axle Bearing Puller Set • For the removal of semi-floating rear axle bearings • Set includes three pullers: 1" to 1-7/8", 1-5/16" to 2-3/8", 1-3/8" to 2-7/8"

5 Lb. Slide Hammer Puller • Jaws can be set up for 2 or 3 jaw internal or external pulling SUN-3911 $155 95

9CL-40291 $600 95

16-Pc Blind Hole Bearing Puller & Slide Hammer Set • 8mm to 58mm, M10 x 1.50, M8 x 1.25, M6 x 1.00

OTC-7947 $322 45

8-Way Slide Hammer Puller Set • 5 lb. hammer • Use for 2/3-way internal or external jobs. Pull flange-type rear axles, stubborn oil seals and bearings, and other press-fit parts

Blind Hole Bearing Puller • 2.5 lbs slide hammer • Includes 4 collets: 3/8" – 1/2" (10-14mm) 9/16" – 11/16" (15-19mm) 5/8" – 1" (18-25mm) 1" – 1-1/4" (25-32mm) CAL-29 $274 95

OTC-4579 $183 95

9-Way Slide Hammer Puller Set • 5 lb. hammer • Pulls flange-type rear axles and most front-wheel drive hubs • Pulls bearings, gears and seals • Dent puller attachment for sheet metal or other unique pulling requirements

Flange-Type Pullers

10 Lb. Heavy-Duty Slide Hammer Puller • 24" long OTC-7703 $132 95

OTC-525 $117 95

Flange-Type Puller Combination • Pulls harmonic balancers, timing gears and parts having two or three tapped holes OTC-6930 $59 95 OTC-7790 $165 95

Flange-Type Puller Kit • Flange-type puller for removal of harmonic balancers, timing gears, and other parts with two or three tapped holes • Puller for removal of steering wheel, pulley, and flywheel

• 5/8" - 18 threaded end adapts to any of OTC’s pulling attachments

SGT-66370 $214 95

10 Lb. Slide Hammer & Pullers for Front Wheel Hubs and Rear Axles • Pullers fit 4, 5 and 6 bolt patterns for use on most domestic and imported cars and light trucks

48-Pc Flange-Type Puller Set • Versatile puller capable of removing a wide variety of components having tapped pulling holes, including harmonic balancers, gears, crankshaft pulleys, etc.

208 | April – June 2021