APC Tools & Equipment Q3 2019

#872 (1/4" Die Grinder) with purchase of #7732

#872 (1/4" Die Grinder) with purchase of #7731C

CP-7732C

1/2" Stubby Impact Wrench w/FREE Die Grinder • 460 ft-lbs. • 4.25” length • Weight: 2.1 lbs. • Jumbo hammer mechanism

CP-7731C

3/8" Stubby Impact Wrench w/FREE Die Grinder • 470 ft-lbs. • 4.25” length • Weight: 2.1 lbs. • Jumbo hammer mechanism

• Composite housing with curved handle • S2S: 1 hand Forward- Reverse operation • 2 positions in reverse: max and lower torque • 2 positions in forward: max and low torque

• Composite housing with curved handle • S2S: 1 hand Forward - Reverse operation • 2 positions in reverse: max and lower torque • 2 positions in forward: max and low torque

$199. 95

$199. 95

#886 (3/8" Ratchet Wrench) with purchase of #7749

CP-7749

1/2” Impact Wrench w/FREE 3/8” Ratchet • Loosening Torque: 955 ft-lbs. • Max Torque: 100-520 ft-lbs. • 7,000 RPM • Twin hammer mechanism • Composite housing • 1 hand-operation behind the trigger • 2 positions in forward and reverse • 360° swivel air inlet • Weight: 3.95 lbs • Length: 6.7”

CP-7782 6

1” Impact Wrench with 6” Extended Anvil w/FREE Tire Buffer Kit • 1,920 ft-lbs. • Regulator with integrated forward/reverse • 3-position power settings in both directions • Ergonomic side handle

#873K (Tire Buffer Kit) with purchase of #7782-6

$689. 95

$299. 95

#734H (1/2" Impact Wrench) with purchase of #7763

#886 (3/8" Air Ratchet) with purchase of #749

CP-749

1/2" Super Duty Impact Wrench w/FREE 3/8" Air Ratchet • 610 ft-lbs. • One-handed reverse button with 4-power settings • Compact design with contoured handle • Spring Hammer™ Double dog clutch in oil bath • Weight: 5.5 lbs.

CP-7763

3/4" Impact Wrench w/FREE 1/2" Impact Wrench • 1,200 ft-lbs. • Twin hammer clutch • Combined power regulator with forward/reverse • Weight: 11.57 lbs.

$274. 95

$539. 95

11

PRICES ARE SUBJECT TO CHANGE AND WILL BE CONFIRMED AT TIME OF ORDER. PLEASE SEE WWW.G2SONLINE.CA/CATALOG FOR UPDATES AND CORRECTIONS.

July 1 to September 30, 2019