APC Tools & Equipment-Q3 2020

ENGINE SERVICE

SERPENTINE BELT SERVICE TOOLS

TIMING SERVICE TOOLS

CTA-2221

$45. 95 LIS-36880 Water Pump Sprocket Holder for GM Ecotec • Holds the Timing Chain and Gear in Place While Removing or Installing Water Pump on Ecotec Engines. • Securely holds water pump sprocket preventing loss of timing or damage to the engine. Special half-moon design allows easier access to water pump gear bolts. Uses access cover bolts to hold the tool in place. Dual Overhead Cam Lock Tool • Dual overhead cam lock tool locks camshaft sprockets in place during belt / chain replacement • This versatile tool easily locks and holds both camshaft sprockets firmly in place • The two parallel bars “float” which allows the knurled pins to align with the sprockets • Preserves the engine timing during belt or chain replace Master Ford Timing Kit • Comprehensive Ford Timing tool kit is used for performing timing services on some ford models from mid-90's through most current models • Ford models with 1.4L, 1.5L, 1.6L, 2.0L, 2.3L & 2.5L which are all variations of the EcoBoost, Duratec(Flex Fuel) & GTDI engines • This is a must have kit for technicians who service Ford, Lincoln, Mazda & Land Rover models • Kit contains CTA parts: #1025, #1026, #1090, #1804, #1806, #2880 & #2884 • Neatly packed in a Blow Mold Case for easy storage LIS-13800 $282. 95

GWR-3680D

15 Pc Serpentine Belt Tool Kit • 100% coverage of all vehicles

$109. 95 GWR-89000

Serpentine Belt Tool Set w/Locking Flex Head Ratching Wrench • New and improved 15 Pc Serpentine Belt Tool • New locking flex-head ratcheting wrench has 5-locking positions • Each locking position is 17Deg • New wrench designed to get around obstructions, lines, motor mounts, pulleys, etc.

$119. 95

LIS-59000

Ratcheting Serpentine Belt Tool • Includes 13, 14, 15, 16, 18mm, and also 19mm socket for Honda and Toyota applications, extension, 3/8" & 1/2" square drives

$94. 95 LIS-59370

$44. 95 LIS-37350

Stretch Belt Remover/Installer • Magnetic faces hold the tool in place on the pulley • Compact, one-piece tool can be used on the front or back side of the pulley

Timing Tool for Ford 3.5L Turbo • For Use When Servicing the Timing Chain on 2017 and Newer Ford V6 3.5L Turbo Engines. • The tool helps ensure camshaft alignment during the removal and installation of the timing chain. • The size is slightly larger than the 37100 / 37200.

$27. 55

LIS-37200 $77. 95

WATER PUMP TOOLS

Timing Tool for Ford with Tensioner • For Use When Servicing the Timing Chain on Ford V6 3.5L and 3.7L Engines. • Applications: 3.5L - 2007 to 2016, non-turbo 2017. 3.7L - 2009 and newer • SUPERSEDES #37100 Timing Tool for Ford 3.5L & 3.7L

SLY-13500

OTC-6677 $69. 95

TOYOTA Water Pump Pulley Wrench • Removes water pump pulley bolts on the 2.4L 2AZ engine used in the TOYOTA Camry and many other models built from 2002 to 2011

Time Chain Retainer • The tools retain the timing chain and lower sprocket positions while servicing the upper sprockets, camshafts, valve springs, or valve seals on 2011 and later 2.0L and 2.4L Ecotec engines • Also used for cylinder head replacement

$99. 95

$129. 95

CTA-4333

Camshaft Pulley Holding Tool • Grooved pins hold the camshaft pulley stationary while loosening and tightening the center shaft bolt • Especially useful for transverse mounted V6 engines, • Adjustable distance: 21mm-100mm

LIS-13500

41mm Water Pump Wrench for GM 1.6L • Works on 1.6L engines in 2004-current Chevrolet Aveo, Pontiac Wave, Suzuki Swift, excluding 2009 with variable timing engine and 1999-2002 Daewoo Lanos

$136. 95

$24. 95

205

PRICES ARE SUBJECT TO CHANGE AND WILL BE CONFIRMED AT TIME OF ORDER. PLEASE SEE WWW.G2SONLINE.CA/CATALOG FOR UPDATES AND CORRECTIONS.

July 1 to September 30, 2020