APC Tools

ENGINE SERVICE

SERPENTINE BELT SERVICE TOOLS

TIMING BELT SERVICE TOOLS

FREE!

ATD-8614

Variable Pin Spanner Wrench • Use with 1/2" drive ratchet or breaker bar • Accommodates the most common metric size pin configurations including: 3.5mm, 4mm, 4.5mm, 5mm, 6mm, 7mm and 10mm

#82106 (2 Pc. Double X Pliers) with purchase of #3680.

GW-3680D

$95. 49

15 Pc Serpentine Belt Tool Kit • 100% coverage of all vehicles

$84. 95

LIS-13800

Water Pump Sprocket Holder for GM Ecotec • Holds the Timing Chain and Gear in Place While Removing or Installing Water Pump on Ecotec Engines. • Securely holds water pump sprocket preventing loss of timing or damage to the engine. Special half-moon design allows easier access to water pump gear bolts. Uses access cover bolts to hold the tool in place.

$44. 95

LIS-59000

LIS-36880

Ratcheting Serpentine Belt Tool • Includes 13, 14, 15, 16, 18mm, and also 19mm socket for Honda and Toyota applications, extension, 3/8" & 1/2" square drives

Dual Overhead Cam Lock Tool • Dual overhead cam lock tool locks camshaft sprockets in place during belt / chain replacement • This versatile tool easily locks and holds both camshaft sprockets firmly in place • The two parallel bars “float” which allows the knurled pins to align with the sprockets • Preserves the engine timing during belt or chain replace

$101. 59

$47. 95

LIS-59370

Stretch Belt Remover/Installer • Magnetic faces hold the tool in place on the pulley • Compact, one-piece tool can be used on the front or back side of the pulley

LIS-18000

Universal Camshaft Bearing Tool • Drives camshaft bearings smoothly • 1.125" - 2.69" (28.58 - 68.3mm)

$296. 26

$27. 13

WATER PUMP TOOLS

LIS-37100

Timing Tool for Ford 3.5L & 3.7L • For use when servicing the timing chain on Ford V6 3.5L (2007+) and 3.7L (2009+) engines • Helps ensure camshaft alignment during removal and installation of the timing chain

SLY-13500

TOYOTA Water Pump Pulley Wrench • Removes water pump pulley bolts on the 2.4L 2AZ engine used in the TOYOTA Camry and many other models built from 2002 to 2011

$69. 95

$99. 95

GW-89000

Serpentine Belt Tool Set w/Locking Flex Head Ratching Wrench • New and improved 15 Pc Serpentine Belt Tool • New locking flex-head ratcheting wrench has 5-locking positions • Each locking position is 17Deg • New wrench designed to get around obstructions, lines, motor mounts, pulleys, etc.

LIS-13500

41mm Water Pump Wrench for GM 1.6L • Works on 1.6L engines in 2004-current Chevrolet Aveo, Pontiac Wave, Suzuki Swift, excluding 2009 with variable timing engine and 1999-2002 Daewoo Lanos

$119. 95

$27. 13

CTA-4333

Camshaft Pulley Holding Tool • Grooved pins hold the camshaft pulley stationary while loosening and tightening the center shaft bolt • Especially useful for transverse mounted V6 engines, • Adjustable distance: 21mm-100mm

LIS-14440

Water Pump Wrench For GM Northstar • Removes and installs the water pump assembly on GM Northstar 4.0L and 4.6L engines

$34. 84

$124. 95

169 169

October 1 to December 31, 2018

PRICES ARE SUBJECT TO CHANGE AND WILL BE CONFIRMED AT TIME OF ORDER. PLEASE SEE WWW.G2SONLINE.CA/CATALOG FOR UPDATES AND CORRECTIONS.