APC Tools

FRONT-END & SUSPENSION

BALL JOINT SERVICE

MUK-609033

Ball Joint Separator Kit • 3 fork sizes: 24mm, 27mm, 31mm • Jaw capacity: 30mm – 65mm • Center screw allows continuous adjustment within the jaw capacity range • Great for use on Audi/VW (A3, A4, A6) BMW, Mercedes-Benz • No damage to aluminum parts and rubber hoses

ATD-8700

Ball Joint Separator Place this tool between the ball joint and the steering knuckle and give a few sharp blows with a hammer, these parts separate easily. Handles most ball joints. Opening is 15/16”

$14. 95

ATD-8701

$339. 95

Tools Tie Rod Separator Drop Forged. Alloy heat treated steel. Opening is 5/8”

$14. 95

KKU-1294H

AST-7865

Ball Joint Extractor with Short Hydraulic Spindle (1.58” (40mm) Opening) • For extracting particularly tight ball pins when dismantling ball joints and or track-rod ends. For heavy equipment segment. • 15-ton grease hydraulic spindle requires little force for a strong pulling performance. • Spring mechanism provides simple adjustment of clamping depth.

Ball Joint Service Tool with 4-Wheel Drive Adapters • For removal and installation of press-fit parts such as ball joints, universal joint and truck brake anchor pins.

$129. 95

$549. 95

AST-7897

Ball Joint Service Tool and Master Adapter Set • Works on upper and lower ball joints on most GM, Ford and Dodge 2 and 4 wheel drive pickups.

AST-7868

Master Ball Joint Adapter Set • Includes all the receiving tubes and removing/installing adapters needed to work on most GM, Ford and Dodge 2-wheel and 4-wheel drive pick-ups, vans and sport utility vehicles through 1997 • Work on press-fit upper and lower ball joints

$229. 95

$210. 60

SUSPENSION SERVICE TOOLS

KINGPIN SERVICE

MUK-432910

Suspension Wear Indicator • Allows for the inspection of moving parts in the lower suspension of a vehicle on any surface • Provides a safe and effective replacement for an assortment of pry bars, cheater pipes, wedges and other tools that are commonly used in an attempt to identify worn suspension parts • Strut bushings and bearings, link pin bushings, wheel bearings, CV axles, ball joints, tie-rod ends, steering rack mounts, torsion bar bushings and control arm bushings all can be checked for wear, play or looseness with this tool • It allows the user to positively see, feel or hear a problem while performing suspension diagnostics

TGR-90150

Heavy Duty King Pin Press • Removes king pins in minutes • Generates 46,000 lbs of force • For use on straight and tapered king pins from 7/8" to 2-5/32" • Isuzu NPR and GMC/Chevrolet W-series trucks require a custom adaptor (#90150-15) • Not compatible with FL981 axles • Ship weight: 30 lbs

$125. 95

185

October 1 to December 31, 2018

PRICES ARE SUBJECT TO CHANGE AND WILL BE CONFIRMED AT TIME OF ORDER. PLEASE SEE WWW.G2SONLINE.CA/CATALOG FOR UPDATES AND CORRECTIONS.