Q4 2023 APC - Tool & Equipment

TUBING & FLARING TOOLS

Flaring Tools

CPS-BFT850DR $476 55

Blackmax® Ratchet/Drill Powered Flaring Tool • Makes 45° flares in soft copper tube from 3/16" to 3/4" O.D. • Forward or reverse ratchet handle • Replace ratchet handle with a cordless drill for even faster flaring! (Drill not included)

OTC-4503 $60 25

Double Flaring Tool Kit • Designed for double or single flare in copper, aluminum, soft steel brake line, and brass tubing (to 45 degrees) • 3/16" to 1/2" (4.8mm to 12.7mm)

Universal Hydraulic Flaring Tool Sets with GM Dies and Adapters

ATD-5463 $79 95

• Includes #70027 mini tube cutter for 1/8" to 5/8" (3mm - 16mm) O.D. Both kits fabricate: • Push connect: 1/4", 5/16" and 3/8"

Double Flaring Tool Kit • Designed for double or single flare in copper, aluminum, soft steel brake line, and brass tubing (to 45°) • 3/16", 1/4", 5/16", 3/8", and 1/2" adapters

72485PRC

• Flare/double flare: 3/16", 1/4", 5/16", 3/8" and 1/2" • Metric bubble flare: 4.75mm, 6mm, 8mm, and 10mm • GM fuel line flare, brake lines and transmission: 5/16" and 3/8" #MTC-72485PRC also fabricates: • GM transmission cooling line 3/8" and 1/2"

Item # MTC-72475PRC MTC-72485PRC

$556.45 $599.25

IMP-293F $204 75

Metric Bubble Flaring Tool • Makes flares on soft steel or Bundy tubing: 4.75mm (3/16"), 6mm, 8mm and 10mm O.D. • Will flare soft double-wall steel tubing with a wall thickness up to .028" • Can also be used with soft copper and aluminum tubing • Flares metric hydraulic brake lines used on European, Japanese and American automobiles and light trucks

OTC-6502 $203 15

Master Brake Flaring Tool Kit • Single: 3/16"-1/2", 4-14mm • Double: 3/16"-1/2", 4-10mm • Bubble: 3/16"-1/2", 4.75-10mm

CAL-165 $146 85

OTC-4504 $61 45

Master In-Line Flaring Tool Kit • Double and single flares: 3/16", 1/4", 5/16", 3/8" • Double and bubble flares: 4.75mm, 6mm, 8mm

Bubble (I.S.O.) Flaring Tool Kit • Designed for crack-free bubble flares on soft steel tubing used in automotive brake systems

• Includes 4.75mm, 6mm, 8mm, and 10mm adapters

Master Flaring and Tubing Tool Set ATD-5478 $187 65

ATD-5464 $94 45

• For use on steel brake, transmission & fuel lines and copper, aluminum & brass tubing • Mini tubing cutter for 1/8" to 5/8" diameter tubes

Bubble (I.S.O.) Flaring Tool Kit • Designed for crack-free bubble flares

on soft steel tubing used in automotive brake systems • Includes 4.75mm, 6mm, 8mm, and 10mm adapters

TIT-51535 $96 05

IMP-93FB $159 95

3/16" Double Flaring Tool • Works on steel, nickel and copper tubing • Includes double ended OP1/OP2 punch, die lubricant and positioning bolt • Compact design allows for on-vehicle use or remove handle to mount in bench vise

45° Double Flaring Tool Set • Makes flares on 3/16", 1/4", 5/16", 3/8" and 1/2" O.D. tubing • Recommended for Bundy and other annealed soft steel tubing (wall thickness to .035") • Also makes single or double flares in soft copper or aluminum tubing

404 | October – December 2023