APC Tool & Equipment

LIFTING EQUIPMENT

Vehicle Positioning Dollies

Truck Ramps

20-Ton Capacity Pair of Wide Truck Ramps • Max. tire width: 15.5" • Retractable T-handle TBQ-TR20000 $1445 85

G7016

G5211 G6313

G6313L

Vehicle Positioning Dollies • For normal shop use, standard “Right Hand” units are all you need • The “Left Hand” version is useful if the car is disabled and the front tire is turned at an extreme angle. In this situation, the foot pedal on the “Left Hand” GoJak is oriented to point out of the wheel well.

20-Ton Capacity Pair of Truck Ramps • 10 ton each ramp • Telescopic 34" T-handle

Pedal Style

Max. Tire Width

Max. Cap. Per Dolly

Max. Vehicle Cap. (4 Dollies)

Item #

Ship Weight 204 lbs

Item # Max. Tread Width

L x W x H

G O J-G5211 Right

P P P P

11"

1,300 lbs

5,200 lbs

$1531.65 $2060.05

NRC-82019

10"

48.25" x 12.625" x 9"

G O J-G6313 Right

13"

1,575 lbs

6,300 lbs

NRC-82020

16"

50.5" x 18.375" x 9.25" 346 lbs

G O J-G6313L Left

13"

1,575 lbs

6,300 lbs

GoJak ® SUV Dolly Right 16"

G O J-G7016

Wheel Dollies / Tire Carts

1,750 lbs

7,000 lbs

Hydraulic Vehicle Position Jack ATD-7465 $253 55

JDI-JDI-TT1 $126 95

Tire Taxi™ • Maximum load of 265 lbs • Transports 5 tire and wheel assemblies or up to 8 tires

• Capacity: 1,500 lbs per jack • Tire capacity: up to 12" wide • Min./Max. Opening: 13.58" / 21.6"

Set of 2 Car Dollies • Capacity: 1,500 lbs per dolly • 3" casters (2 locking) • 12" x 16" x 4.8" ATD-7466 $268 95

GAI-GTJ-01 $209 95

TRAC Tire Jack – Tire & Wheel Assembly Assistance Cart for Tire Rotations & Installs • 350 lbs capacity • Allows to remove or install a tire from a vehicle near the ground, by simply sliding it under the tire and carrying it off or on the vehicle • Manipulate tires without lifting with your back • Steel construction with convenient rollers

GAI-GTRP-01 $131 55

1500 Lbs (3/4 Ton) Hydraulic Vehicle Positioning Jack • Max. tire width: 13" • Max. tire diameter: 32" • Min./Max. opening: 14-3/4" / 27-3/4" TBQ-PHJ01500 $199 95

TRAC Roller Plate Accessory • For use with the TRAC Tire Jack • Allows for an easier alignment of the holes of the wheel to the studs of the hub • Heavy-duty welded steel construction

Stinger® Easy Roller™ Hydraulic Vehicle Position Jack • Capacity: 1,500 lbs per jack • Fits tread widths up to 12” O TC-1580 $452 35

GAI-Y471106 $811 75

350 Lbs Capacity Truck Tire Dolly • Simply slide the rollers underneath the tire and use the jack handle to raise it to the

desired height and position • Collapsible handle frame

July – September 2025 | 233