APC Tool & Equipment

FRONT-END & SUSPENSION

Wheel Hub Service Tools

Torsion Bar Tools

CAL-90703 $44 05

AST-78823 $101 05

3/8" Drive Dodge/Ram Truck Rear Wheel Hub Nut Socket • Fits rear axle locknuts of Dodge/Ram trucks with six holes • Applications: models 1500-5500 from 2006-2014 (Chassis codes: D2, DC, DD, DH, DJ, DP, DR, DS) • Comparable to Mopar® factory tool #8954A

Late Model GM Heavy-Duty Torsion Bar Unloading Tool for 2011+ • Needed to service torsion arm and front suspension on many 2011+ full-size GM trucks • Holds the torsion bar in place while you loosen or tighten the adjusting nut

STK-71310 P

Inner Race Hub Saver • 6" steel cone cylinder with an integrated bearing in its 8.5" base • Allows the technician to place the hub on the tip of the cone and rotate it with one hand while applying heat from an oxyacetylene torch

GM Torsion Bar Unloader O TC-7832 P

• Required to safely release the tension on the front suspension torsion bar to service the front suspension • Larger design to cover the newer GM Truck applications: 2011-newer HD C/K trucks

• While rotating the hub, the torch will raise the temperature of the inner bearing race evenly and quickly causing the race to expand and release from the hub in about 5 minutes

Ball Joint Service Tools

CTA-1732 $48 15

AST-7865 $195 95

41mm 12 Point BMW/Benz Ball Joint Impact Socket, 1/2" Drive • Applications includes BMW and Mercedes lower ball joint

Ball Joint Service Tool with 4-Wheel Drive Adapters • Removes and installs press-fit parts such as ball joints, universal joint and truck brake anchor pins • Ball joint service kit allows service for

AST-78620 $45 25

1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles) • Receiver tubes: 2-3/4" x 3", 2-1/4" x 2-1/2" & 1-3/4" x 2", installation and removing adapters

Subaru Ball Joint Puller • Removes seized bolt-in Subaru ball joints in a single pulling motion • For Subaru Baja 2003+, Forester 1998+, Impreza 1993+, Legacy 1990+, Outback 2000+ and more

AST-7868 $179 25

Master Ball Joint Adapter Set • Includes all the receiving tubes and removing/ installing adapters needed to work on most GM, Ford and Dodge 2-wheel and 4-wheel drive pick-ups, vans and sport utility vehicles through 1997

TBQ-17392 $99 95

9-Pc Ball Joint Service Kit

AST-7897 $366 95

• Kit includes installation and removing adapters for 1967 to current 1/2-Ton and 3/4-Ton 4WD vehicles having the Dana 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles)

Ball Joint Service Tool and Master Adapter Set • Removes and replaces ball joints • Works on press-fit upper and lower ball joints on most GM, Ford, and Dodge 2 and 4 wheel drive pick-ups, vans and sport utility vehicles through 1997 Goliath Ball Joint Service Tool & Master Adapter Set • The C-frame press has both wider opening and longer arms to a more easily fit adapters • Works on press-fit upper and lower ball joints on 2WD & 4WD domestic, import and Euro vehicles through the 2020’s AST-78197 $416 55

TBQ-17398 $185 75

21-Pc Master Ball Joint Service Kit • Heavy duty tool set removes and installs ball joints, U-joints and brake anchor pins • Includes a C-frame press and forcing screw, as well as all of the receiver tubes and adapters necessary to work on press-fit upper and lower ball joints on most Dodge, GM, Ford and other 2WD and 4WD cars, pickups, vans and SUVs through 2006

July – September 2025 | 355