APC Tools & Equipment - 4th Quarter 2019

FRONT-END & SUSPENSION

TIE ROD SERVICE TOOLS

$49. 95 Pitman Arm Puller OTC-7314A

$85. 95 Outer Tie Rod Remover OTC-7503

STK-71470

Tie Rod Coupler • Tough alloy steel coupler with dual I-bolt set screws provide a quick temporary steering repair for vehicles with a broken tie rod. • Tie Rod Coupler I-bolt set screws secures the coupler to the broken tie rod by hand tightening and/or locking down the set screws by using a small leverage bar • The temporary steering fix saves the tow driver up to 15 minutes by ensuring the driver’s ability to center and properly secure the vehicle on the roll back bed as well as maneuvering the vehicle around the lot to the frame bench or repair bay

SLY-11880

Large Pitman Arm Remover • For removing large Pitman arms on 3/4 to 1 ton pickup trucks • Applications: Ford F250/350, Dodge 2500/3500, Chevrolet/GMC 2500/3500

$434. 95

$45. 95

SLY-14900

Sheppard Pitman Arm Remover • Forged Alloy Steel To Remove The Pitman Arm From Sheppard Steering Boxes • Ball Bearing Tip To Protect The Sector Shaft • Designed With A Fine Thread Pitch For Reduced Effort During Service • Removable Nut Attachment For Use On Short And Long Sector Shafts

LAN-615

Tie Rod Wrench • For adjusting tie rods on vehicles with rack and pinion steering • Works on most spline, hex, and two flat design tie rods • Spring-loaded upper jaw pivots to accommodate tie rods ranging in size from 10mm–18mm • Wrench is self-adjusting • Cam action increases the gripping pressure as the load applied to the handle increases • Heat-treated for durability

$484. 58

OTC-6295

Front End Service Set • This kit includes five popular tools used for servicing Pitman arms, ball joints, and tie rods on most vehicles • Set includes: • Two Pitman Arm Pullers for large or small ball joint applications • Two Ball Joint Separators • Three different Tie Rod Pullers

$99. 95

CONTROL ARM SERVICE

$189. 95

STABILIZER BAR SERVICE

OTC-6007

Lower Control Arm Triple Action Tool

Lower Control Arm Prying Tool Installing a ball joint on a lower control arm typically requires the effort of two people. However, with this tool and our No. 7420 or 7421 pry bar – or any 7/8" diameter pry bar – it’s a one-person job. No. 6007 – Lower control arm prying tool.

9CL-89102

7’’ Low-profile Sway Bar Link Pliers with Saw teeth • Holds and easily removes sway bar link • Special 3-point gripping design strongly grips and works on rusted nuts, pipes and other objects • Thinner body (compared to 9CL-89101) to tackle limited space problems

$20. 95

$30. 95

OTC-7832

9CL-89501

GM Torsion Bar Unload • Required to safely release the tension on the front suspension torsion bar to service the front suspension. • Larger design to cover the newer GM truck applications. • Application: 2011 & newer HD C/K trucks.

9” Long Sway Bar Link Pliers with Sawteeth • Holds and easily removes sway bar link • Strongly grips and works on rusty nuts, pipes, round-shaped and other objects • Unique teeth design grips an object tighter and tighter when the pliers is turned in the same direction

$28. 95

$179. 95

186

PRICES ARE SUBJECT TO CHANGE AND WILL BE CONFIRMED AT TIME OF ORDER. PLEASE SEE WWW.G2SONLINE.CA/CATALOG FOR UPDATES AND CORRECTIONS.

October 1 to December 31, 2019