APC Tools & Equipment - Q1 - 2021

COOLING SYSTEM SERVICE

COMBUSTION LEAK DETECTORS

LIS-75500

Combustion Leak Detector • Fluid changes from blue to yellow when exposed to combustion gases from the radiator

UVW-560000

Combustion Leak Tester • Fast economical and accurate method to test for combustion gas leaks from: Head Gaskets, Cylinder Heads, Engine Blocks

$10. 25 $10. 25 LIS-75630 LIS-75730 $50. 42

• Works on gasoline and diesel engines

Combustion Leak Fluid

$85. 44

Diesel Combustion Leak Fluid

UVW-560500

Replacement Tester Fluid for #UV-560000 (16oz)

MTC-55975

Intella Sense III – Combustible Gas Leak Detector • High sensitivity sensor • Response time: less than 1 second • High/Medium/Low sensitivity selection • Includes (2) “C” batteries, leak test vial and replacement filters

$15. 40

$278. 05

FAN CLUTCH WRENCHES & PULLEY HOLDERS

GWR-41580D

Fan Clutch Service Set • Covers most vehicles with bolt on pulleys and also newer Chrysler engines with press on pulleys requiring special pins to hold housing • Features the patented universal pulley holder • Contains: • Ford Fan Clutch

OTC-7483A

Wrench, 4.9 L (3422) • Fan Clutch Wrench – Diesel (3473) • Universal Pulley Holder (3900) • Pulley Holder Pin Set Small (8mm) (3901D) • Pulley Holder Pin Set large (10mm, 18mm) (3902D)

Water Pump Pulley Remover/Installer • Helps remove and install water pump pulleys faster and easier on specific Ford, Lincoln and Mercury 3.0L DOHC engines • The puller works on the below vehicles with a Ford 3.0 DOHC engine: • Ford Escape 2001–2012 • Ford Fusion 2006–2012 • Ford Taurus 2001– 2005 • Lincoln MKZ 2007–2012 • Mercury Mariner/Milan 2006–2011 • Mercury Sable 2001–2005

$184. 95

$154. 45

LIS-43300

7 Pc Pneumatic Fan Clutch Wrench Set to Remove & Install • Fits Ford, GM and Chrysler • Includes 32mm, 36mm, 1-7/8”, 2”, 7/8”, 40mm, 47mm

$236. 85

LIS-43600

Universal Fan Clutch Wrench Set • For use on most popular applications • Hooked wrench will hold bolted on water pump pulleys • Double-sided spanner style wrench will hold pressed on pulleys on many GM, Jeep and Dodge vehicles • Double-ended turning wrench with 36mm and 47mm/1-7/8" openings and 1/2" square drive holes for use with a hand ratchet or a breaker bar

CTA-4333

Camshaft Pulley Holding Tool • Grooved pins hold the camshaft pulley stationary while loosening and tightening the center shaft bolt • Especially useful for transverse mounted V6 engines • Adjustable distance: 21mm-100mm

$133. 85

$86. 47

23

PRICES ARE SUBJECT TO CHANGE AND WILL BE CONFIRMED AT TIME OF ORDER. PLEASE SEE WWW.G2SONLINE.CA/CATALOG FOR UPDATES AND CORRECTIONS.

October 1 to December 31, 2020