APC Tools & Equipment - Q2 - 2021

FRONT-END & SUSPENSION

Axle/Spindle & Locknut Tools

Wheel Hub Service Tools

KKU-229-2  $499 15

10-Ton Capacity HydraulicWheel Hub Puller • For all 4 and 5-hole hubs on almost all passenger cars, including VW, Audi, Volvo, Fiat, etc. • Also for extracting drive shafts for vehicles with front wheel drive

GRY-1708SN  $184 15

8-Pc 1/2" Drive 1 2 Pt. Axle/Spindle Nut Socket Set • 29mm, 30mm, 32mm, 34mm, 35mm, 36mm, 38mm, 39mm

6-Pc 1/2" Drive Spindle Nut Socket Set • Fits most 4WD SUV’s & light truck axle locknut applications • Use with a torque wrench, ratchet, or breaker bar GWR-41660D  $129 85

Made in Canada

TBQ-912  $752 05

The Ultimate Hub Puller • Removes press fit wheel bearings in seconds • Works on foreign and domestic cars, vans and trucks • Sliding weight of approximately 15 lbs

6-Pc 4WD Spindle Nut Socket Set OTC-4543A  $167 85

• Covers most SUV and light truck applications • 1/2" square drive sockets, allowing use of a torque wrench, ratchet, or breaker bar

Master Suspension Kit • Helps remove all components of the wheel knuckle, MUK-433 100  $1319 05

LOC-855A  $371 45

Texas Twister Air Hammer Pulling Kit • Converts your air hammer into a pneumatic slide hammer • Pulls axles, hub bearings, bolts, harmonic balancers, distributors, seals, axle pinion flanges, or anything else that needs to be pulled • Includes adapters to connect to your current pullers

including the wheel bearing assembly; push out the drive shaft; remove the lower ball joint/suspension arm Kit includes: • Heavy duty 13 lb slide hammer that can also adapt to your existing tools • Drop forged flange and hook • Universal axle shaft pusher/hub puller • Twin cone set with a “VIBRO-IMPACT” spindle

MUK-433 414  $352 35

STK-71410  $92 95

Original “VIBRO-IMPACT” Universal Drive Shaft Pusher/Hub Puller • Pushes out bonded or heavily corroded drive shafts • Suitable for almost all 4- and 5-hole wheel hubs with a pitch circle diameter up to 136 mm • For use with an impact wrench (not included)

Axle Popper Fork and ShimKit • Breaks loose half shafts from transaxle on front wheel drive vehicles • Shim included in kit to fill larger gap found on some vehicles. • Applies even pressure to both sides of shaft • Safer and surer than a pry bar

Universal Heavy-Duty Hub Puller with Plate OTC-6574  $248 35

9CL-91300  $88 55

8-Pc Axle Spindle Rethreading Set • Repairs damaged or stripped CV joint threads • Sizes: M20 x 1.25, M20 x 1.50, M22 x 1.00, M22 x 1.50, M24 x 1.50, M24 x 2.00, 3/4" UNEF, 13/16" UNEF

• For use on frozen hubs, axle shafts, and other tough pulling applications • Fits wheel hubs with 5"-8"+ bolt circles

January – March 2021  | 353