APC Tools & Equipment - Q2 - 2021

FRONT-END & SUSPENSION

Ball Joint Service Tools

Wheel Hub Service Tools

OTC-6575  $817 75

CTA-1732  $37 85

Hub Grappler™Kit • For servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle • Application coverage up to 2009 model year • Includes tie rod/ball joint tool and two Ford axle installers

41mm 12 Point BMW/Benz Ball Joint Impact Socket, 1/2" Drive • Applications includes BMW and Mercedes lower ball joint

AST-78620  $35 05

Subaru Ball Joint Puller • Removes seized, rusted and/or corroded bolt-in Subaru ball joints in a single pulling motion • Designed for easy use with vehicle on jack stands using a deep 24mm socket and impact, a hand wrench or any common slide hammer • For Subaru Baja 2003+, Forester 1998+, Impreza 1993+, Legacy 1990+, Outback 2000+ and more

OTC-6575H  P

Hydraulic Hub Grappler™Kit • Same as #OTC-6575 but also includes the Hydraulic Kit

Ball Joint Service Tool with 4-Wheel Drive Adapters • Removes and installs press-fit AST-7865  $119 95

parts such as ball joints, universal joint and truck brake anchor pins • Ball joint service kit allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles) Set includes: • C-frame press • 3 receiver tubes: 2-3/4" x 3", 2-1/4" x 2-1/2" & 1-3/4" x 2", installation and removing adapters

Hub Grappler™Hydraulic Kit OTC-6575-3  $1109 75

Hub Grappler™ Puller OTC-6575-1  $270 05

LOC-830A  $245 65

Universal Hub Removal Tool • Ideal for Dodge and other HD trucks • Safely remove all frozen hubs instantly without damaging the axle • Universal fit mounts to all axle bolted hubs - 5, 6 & 8 lug hubs

Master Ball Joint Adapter Set AST-7868  $134 85

• Mounts to two studs using supplied flanged nuts in seconds • Use with 5 lb. hammer to knock frozen hubs out of axles

• Includes all the receiving tubes and removing/installing adapters needed to work on most GM, Ford and Dodge 2-wheel and 4-wheel drive pick-ups, vans and sport utility vehicles through 1997

CAL-977  $96 25

Toyota Front Hub Nut Socket • Designed to fit front hub locknuts on 2007 and up 2WD 4 Runners and Tundras, as well as 2008-2014 Sequoias • 8-pin design, with 3/4" drive • Comparable to Toyota factory tools 09318-12010 and 09602-60010

AST-7897  $219 95

Ball Joint Service Tool and Master Adapter Set • Removes and replaces ball joints • Works on press-fit upper and lower ball joints on most GM, Ford, and Dodge 2 and 4 wheel drive pick-ups, vans and sport utility vehicles through 1997

Torsion Bar Tools

AST-78823  $72 15

Late Model GMHeavy-Duty Torsion Bar Unloading Tool for 2011+ • Needed to service torsion arm and front suspension on many 2011+ full-size GM trucks • Holds the torsion bar in place while you loosen or tighten the adjusting nut • Forged alloy design with 1" hex drive bolt • Thread size: 3/4-16"

Goliath Ball Joint XL C-Frame Press AST-78100  $145 85

• For max clearance and easier use of tall and stacked adapters • Includes both long and short drive screws

354 |  January – March 2021